Net Optics 10G/1G Link Aggregator combines all the traffic from up to ten 1 Gigabit or 10 Gigabit network Taps or Span ports into four SFP+ monitor ports. Monitor as many as ten links or switches at one time with up to four tools.

Emerging 10 Gigabit network speeds present new monitoring challenges. Can you still use your 1 Gigabit monitoring tools? How can you use new 10 Gigabit tools efficiently, when many of your 10 Gigabit links currently have low utilization? Can your monitoring solutions extend across both 1 Gigabit and 10 Gigabit links and switches? The Net Optics 10G/1G Link Aggregator addresses these challenges by enabling traffic to be aggregated from as many as ten links with any mix of 1 Gigabit copper, 1 Gigabit fiber, and 10 Gigabit fiber links, Span ports, and monitoring tools. Both singlemode and multimode fiber are supported.

No Dropped Packets

The Link Aggregator scans incoming traffic from the network ports on a first-in-first-out basis. Scan rate is optimized to ensure that no packets are dropped as long as the sum of data rates on the network ports does not exceed the monitoring port capacity of 10 Gbps (1 Gbps for 1 Gigabit monitor ports).

Data Rate Conversion

Monitor 1 Gigabit links with 10 Gigabit tools by populating the network ports with 1 Gigabit SFP modules and the monitor ports with 10 Gigabit modules. Packets will never be dropped because the aggregated traffic from all ten network ports cannot exceed the monitor port capabilities. Conversely, use 1 Gigabit tools to monitor low utilization 10 Gigabit links by plugging 1 Gigabit SFP modules into the network ports and 10 Gigabit modules into the monitor ports. Or, mix 1 Gigabit and 10 Gigabit modules on network and monitor ports in any combination to suit your monitoring needs.

SFP+ Flexibility
Net Optics 10G/1G Link Aggregator provides connectivity to network links, Span ports, and monitoring tools with dissimilar media interfaces. The SFP+ ports enable the Link Aggregator to be field upgraded or reconfigured with 10GigaBit SFP+ or 1 Gigabit SFP modules for increased flexibility. Populate only the ports you need to control capital expenses, or provision extra ports to ensure uptime and port availability.

Simple Configuration

Deploying the 10G/1G Link Aggregator is easy – just plug it in and it works. The speed of the SFP+ modules is detected automatically, and there are no configuration switches or jumpers.
Secure Access

The 10G/1G Link Aggregator has no IP address on the network, so it is immune to viruses or other attacks.
Doing Our Part

Net Optics is dedicated to ensuring user safety, and developing products that are increasingly environment friendly. The 10G/1G Link Aggregator adheres to UL and CE safety certifications; FCC, VCCI, and C-Tick EMC certifications; and RoHS and WEEE environmental certifications.

Operating Specifications:
Operating Temperature: 0°C to 40°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non condensing

Mechanical Specifications:
Redundant Power Supplies:
AC Input: 100-240 VAC, 1.45A, 47-63Hz
DC Input: -48VDC nominal. -36 to -72VDC, 4.0A
DC Receptacle: Terminal peak, 12-14 gauge wire

Dimensions: 1.75" high x 17" deep x 19" wide (1U 19" rack-mount)

Multimode:
Cable Type: Multimode, Corning 62.5/125µm, wavelength 850nm
Transceiver: Gigabit SR 850nm, VCSEL
Link Distance Supported: 220 meters

Singlemode:
Cable Type: Singlemode, Corning 8.5/125µm, wavelength 1310nm
Transceiver: Gigabit LR 1310nm, VCSEL
Link Distance Supported: 2 km

Connectors:
(14) SFP+ ports for 10 Gigabit SFP+ and 1 Gigabit SFP transceiver modules

Certifications:
Fully RoHS compliant

Part Number: LA-1400