Net Optics In-line Link Aggregator extends the reach of GigaBit monitoring devices to multiple network links. The Link Aggregator combines all the traffic from up to four 10/100/1000Base-T network links into (4) SFP transceiver monitoring ports.

Installing a monitoring device on multiple network links is often time consuming and expensive. Restricted by tight budgets, security managers must make compromises that leave portions of the network exposed to attacks. Net Optics' In-line Link Aggregator addresses this challenge by increasing the number of links covered by monitoring devices already installed. The small form-factor pluggable (SFP) monitor port connectors increase monitoring options by allowing either GigaBit copper or fiber based deployments.

No Packets Left Behind

The In-line Link Aggregator scans incoming traffic from the network links on a first-in-first-out basis. Scan rate is optimized to ensure that no packets are dropped as long as the sum of data rates on the network ports does not exceed 1 GB.

Security and Visibility

Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

SFP Flexibility
Net Optics Link Aggregator with SFP Monitor Ports provides connectivity to network links for monitoring devices with dissimilar interface cards. The SFP Monitor Ports allow the Link Aggregator to be field upgraded or reconfigured for increased flexibility. The Link Aggregator with SFP Monitor Ports requires the purchase of one or two SFP conversion kits.

Reliability

For additional reliability, the Link Aggregator features redundant power supplies. Power LEDs on the front of the Tap indicate the current power source.

Download PDF

Operating Specifications:
Operating Temperature: 0°C to 55°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non condensing

Mechanical Specifications:
Redundant Power Supplies:
Input: 100-240 VAC, 0.5A, 47-63Hz
DC Power Input: -48 VDC typical, -36 VDC min, -75 VDC max
Dimensions: 1.75" high x 17" deep x 17" wide

Cable Interface:
Copper Cable Type:
22-24 AWG Unshielded twisted pair cable, CAT5/CAT5E
Link Distance Supported: 100 meters

Connectors:
(4) Empty SFP based connectors (monitor ports)
(8) RJ45 connectors (network ports)

Certifications:
Fully RoHS compliant

Part Number: LA-IF4CU3/4SFP

 

Passive, Secure Technology		Warranty		Ease of Use
Supports monitoring of 4 network links with a single NIC, increasing monitoring efficiency Regeneration technology enables four devices to simultaneously monitor all aggregated traffic - using only one NIC per device Provides complete full-duplex visibility at 10, 100, or 1000 Mbps without data stream interference or introducing a point of failure No IP address is needed for the Tap or monitoring device, enhancing monitoring security Small form-facter pluggable (SFP) monitor port connectors increase monitoring options Redundant power ensures monitoring uptime Fully IEEE 802.3 compliant Fully RoHS compliant		All Net Optics products come standard with a 1 year manufacturer's warranty Optional 1 or 2 year extended warranty available at time of product purchase		LED indicators show redundant power, speed, link, and activity status Front-mounted connectors support easy installation and operation Compatible with all major manufacturers' monitoring devices,including protocol analyzers, probes, and intrusiondetection/prevention systems

10/100/1000 Link Aggregator		SFP Modules
- LA-IF4CU3/4SFP   Link Agg, 4 Segment, IL, Copper,    10/100/1G, 4 SFP Ports - LA-IF4CU3/4SFP-DC   Link Agg, 4 Segment, IL, Copper,    10/100/1G, 4 SFP Ports (-48VDC) - LA-IF4CU3/4SFP-W1   One Yr Extended Warranty - LA-IF4CU3/4SFP-W2   Two Yr Extended Warranty		- SFPKT-SX   Kit, Fiber, 1G, SX, SFP    Transceiver(850nm) w/cable 62.5µm - SFPKT-LX   Kit, Fiber, 1G, LX, SFP   Transceiver(1310nm) w/cable 8.5µm - SFPKT-CU3   Kit, Copper, 10/100/1000, SFP   Transceiver w/cable (minimum order Qty 1 per unit)