Net Optics 2x1 OC-3 Regeneration Taps solve the key physical layer challenges of multi-device monitoring for OC-3 networks. For a better picture of network health, these Taps connect two different network management and security devices at any single OC-3 network location.
One Tap, No Idle Resources
Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple 
devices simply means a better return on monitoring investments.
Net Optics unique dust cap is tethered to the connector so it is always right where you need it.
Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.
Splitter Specifications
Split Ratio: 50/50
Fiber Type: Multimode Corning 62.5/125µm, wavelength 1300nm
Insertion Loss: Network Port: 4.5 dB
Monitor Port: 9.0 dB
Fiber Type: Singlemode Corning 8.5/125µm, wavelength 1310nm
Insertion Loss: Network Port: 3.7 dB
Monitor Port: 7.4 dB
Operating Specifications
Operating Temperature: 0°C to 55°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non-condensing
Mechanical Specifications
Power Supply:
Input: 100-240VAC, 0.5A, 47-63Hz
Dimensions: 1.75” high x 10.5” deep x 17” wide
Connectors
(2) Duplex SC connectors (monitoring ports)
(2) Duplex SC connectors (network ports)
Fiber Optic Interface
Connectors: Class I, eye-safe, laser emitter type. These Class I Lasers
conform to the applicable requirements per US 21 CFR (J) and
EN 60825-1, also UL 1950 applications.
Optical Transmitter Wave Length: Multimode Fiber, 1300 nm wavelength
Output Power: -19 dB min, -14 dB max
Optical Receiver Input Sensitivity: -14 dB min to -31 dB max
Optical Transmitter Wave Length: Singlemode Fiber, 1310 nm wavelength
Output Power: -15 dB min, -8 dB max
Optical Receiver Input Sensitivity: -31 dB max
Certifications:
Fully RoHS compliant
Part Numbers:
2x1 OC-3 MM Regeneration Tap
RGN-MM-OC3-IL2
2x1 OC-3 SM Regeneration Tap
RGN-SM-OC3-IL2
