Net Optics 4x1 OC-3 Regeneration Taps

Net Optics 4x1 OC-3 Regeneration Taps solve the key physical layer challenges of multi-device monitoring for OC-3 networks. For a better picture of network health, these Taps connect up to four different network management and security devices at any single OC-3 network location.

One Tap, No Idle Resources

Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments.
Net Optics unique dust cap is tethered to the connector so it is always right where you need it.

Security and Visibility

Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Download PDF

Splitter Specifications:
Split Ratio: 50/50

Fiber Type: Multimode Corning 62.5/125µm, wavelength 1300nm
Insertion Loss: Network Port: 4.5 dB
Monitor Port: 9.0 dB

Fiber Type: Singlemode Corning 8.5/125µm, wavelength 1310nm
Insertion Loss: Network Port: 3.7 dB
Monitor Port: 7.4 dB

Operating Specifications:
Operating Temperature: 0°C to 55°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical Specifications:
Power Supply:
Input: 100-240VAC, 0.5A, 47-63Hz
Dimensions: 1.75” high x 10.5” deep x 17” wide

Connectors
(4) Duplex SC connectors (monitor ports)
(2) Duplex SC connectors (network ports)

Fiber Optic Interface:
Connectors: Class I, eye-safe, laser emitter type. These Class I Lasers
conform to the applicable requirements per US 21 CFR (J) and
EN 60825-1, also UL 1950 applications.

Optical Transmitter Wave Length: Multimode Fiber, 1300 nm wavelength
Output Power: -19 dB min, -14 dB max
Optical Receiver Input Sensitivity: -14 dB min to -31 dB max

Optical Transmitter Wave Length: Singlemode Fiber, 1310 nm wavelength
Output Power: -15 dB min, -8 dB max
Optical Receiver Input Sensitivity: -31 dB max

Certifications:
Fully RoHS compliant

Part Numbers:
4x1 OC-3 MM Regeneration Tap
RGN-MM-OC3-IL4
4x1 OC-3 SM Regeneration Tap
RGN-SM-OC3-IL4

Passive, Secure Technology

Warranty

Ease of Use

Enables real-time, simultaneous monitoring of a single OC-3 link with four monitoring devices
Supports passive monitoring at 155 Mbps
No IP address is needed for the Tap or monitoring device, enhancing monitoring security
Fully RoHS compliant

All Net Optics products come standard with a 1 year manufacturer's warranty
Optional 1 or 2 year extended warranty available at time of product purchase

LED indicators show power and link status
Front-mounted connectors support easy installation and operation
Connectors are perfectly angled to reduce cable strain
Silk-screened application diagram illustrates all connections for easy deployment
Optional custom monitoring cables support easy full-duplex monitoring by sending each side of the signal to a separate monitoring device NIC
Tested and compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems

4x1 OC-3 MM Regeneration Tap		4x1 OC-3 SM Regeneration Tap

- RGN-MM-OC3-IL4 Regen, 4x1, IL, Fiber, OC3, MM 62.5µm, SC, 1300nm		- RGN-SM-OC3-IL4 Regen, 4x1, IL, Fiber, OC3, SM 8.5µm, SC, 1310nm