Net Optics 8x1 GigaBit Regeneration Taps solve the key physical layer challenges of multi-device monitoring for GigaBit fiber networks. For a complete picture of network health, these Taps connect up to eight different network management and security devices at any single GigaBit network location.

One Tap, No Idle Resources

Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments.
Net Optics unique dust cap is tethered to the connector so it is always right where you need it.

Security and Visibility

Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Reliability

For extra uptime protection, Net Optics Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power.

Splitter Specifications:
Split Ratio: 50/50

Fiber Type: GigaBit SX Multimode Corning 62.5µm, wavelength 850nm
Insertion Loss: Network Port: 4.5 dB
Monitor Port: 9.0 dB max

Fiber Type: GigaBit LX Singlemode Corning 8.5µm, wavelength 1310nm
Insertion Loss: Network Port: 3.7 dB 
Monitor Port: 7.4 dB max

Operating Specifications:
Operating Temperature: 0°C to 55°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical Specifications:
Power Supply:  
Input: 100-240VAC, 0.5A, 47-63Hz
Dimensions: 1.25” high x 8” deep x 17” wide

Connectors:
(8) Duplex SC connectors (monitor ports)
(2) Duplex SC connectors (network ports)

Fiber Optic Interface:
Connectors: Class I, eye-safe, laser emitter type. These Class I Lasers
conform to the applicable requirements per US 21 CFR (J) and EN 60825-1, also UL 1950 applications.
Optical Transmitter Wave Length: 850 nm nominal
Output Power: -9.5 dB min, -4 dB max
Optical Receiver Input Sensitivity: 0 dB min, -17 dB max

Optical Transmitter Wave Length: 1310 nm nominal
Output Power: -10 dB min, -3 dB max
Optical Receiver Input Sensitivity: -3 dB min, -20 dB max

Certifications:
Fully RoHS compliant

Part Numbers:
8x1 GigaBit SX Regeneration Tap
RGN-SX-IL8
8x1 GigaBit SX 50µm Regeneration Tap
RGN-50SX-IL8
8x1 GigaBit LX Regeneration Tap
RGN-LX-IL8