 |
Net Optics 4x1 10/100 Span Regeneration Taps solve the key physical layer challenges of access to scarce spanning resources. For a complete picture of network health, these Taps connect two switch Span ports to up to eight different network management and security devices. Each Span session can be independently monitored by up to four devices.
One Tap, No Idle Resources
Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments.
Span Port Sharing
 When a span session is connected into the Network A port, this data can be monitored simultaneously on all Monitor A ports. A second span session can be monitored simultaneously on all Monitor B ports. The data on the Network A and Network B ports remains completely separate. Each monitoring device receives the same traffic in real time, providing a detailed picture of network health.
Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line.
Reliability
For extra uptime protection, Net Optics Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power.
Operating Specifications:
Operating Temperature: 0ºC to 55ºC
Storage Temperature: -10ºC to 70ºC
Relative Humidity: 10% min, 95% max, non-condensing Mechanical Specifications:
Redundant Internal Power Supplies:
Input: 100-240 VAC, 0.5A, 47-63Hz
Dimensions: 1.75” high x 10.5” deep x 17” wide Cable Interface:
Copper Cable Type: 22-24 AWG unshielded twisted pair cable, CAT5/CAT5E
Link Distance Supported: 100 meters Connectors:
(8) RJ45, 8 pin connectors (monitor ports)
(2) RJ45, 8 pin connectors (network ports) Certifications:
Fully RoHS compliant
Part Number: RGND-CU-S4
| Passive, Secure Technology | | Warranty | | Ease of Use |  | | | | | - Enables real-time, simultaneous monitoring of two 10 or 100 Mbps span sessions, with up to four monitoring devices
- Supports monitoring of all traffic forwarded by network switch span ports, including VLANs
- No IP address is needed for the Tap or monitoring device, enhancing monitoring security
- Redundant power ensures monitoring uptime
- Fully IEEE 802.3 compliant
- Fully RoHS compliant
 | | - All Net Optics products come standard with a 1 year manufacturer's warranty
- Optional 1 or 2 year extended warranty available at time of product purchase
| | - LED indicators show redundant power, speed, link, and activity status
- DIP switches select auto-negotiation or fixed speed and duplexing settings for the Tap
- Front-mounted connectors support easy installation and operation
- Silk-screened application diagram illustrates all connections for easy deployment
- Tested and compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems
|
4x1 10/100 Span Regeneration Tap
| | - RGND-CU-S4
Regen, 4x1, Span, Copper, 10/100, Zero Delay
|
|
|
|
 |
|
