10 GigaBit Fiber Tap

Get total traffic visibility for monitoring and security devices by placing Net Optics 10 GigaBit Fiber Taps on critical network links. The all-optical design of the 10 GigaBit Fiber Tap is optimized and tested for high-performance on 10 GigaBit fiber networks. Available for both singlemode and multimode fiber, 10 GigaBit Fiber Taps support passive monitoring of GigaBit links at 10,000 Mbps.

All Optical Design

Requiring no power, the 10 GibaBit Fiber Taps maintain permanent passive access ports without introducing a point of failure or disturbing other network connections. These passive Taps deliver full-duplex monitoring with zero impact on network traffic around the clock. Net Optics unique dust cap is tethered to the connector so it is always right where you need it.

Simply Plug It In

Full-duplex monitoring is a snap with a custom monitoring cable that sends each side of the signal to a separate NIC on the monitoring device. All network and monitoring cables necessary for plug-and-play deployment are included with the Tap.

Security and Visibility

Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Splitter Specifications:

Fiber Type: Corning Multimode 62.5/125µm, wavelength, 850nm 

Split Ratio	Network Port Insertion Loss	Monitor Port Insertion Loss
90/10	1.3 dB	11 .5 dB
80/20	1.8 dB	8.1 dB
70/30	2.4 dB	6.3 dB
60/40	3.1 dB	5.1 dB
50/50	4.5 dB	4.5 dB

Fiber Type: Corning Singlemode 8.5/125µm, wavelength, 1310nm

Split Ratio	Network Port Insertion Loss	Monitor Port Insertion Loss
90/10	0.8 dB	12.0 dB
80/20	1.3 dB	8.0 dB
70/30	2.0 dB	6.1 dB
60/40	2.8 dB	4.8 dB
50/50	3.7 dB	3.7 dB

Operating Specifications:
Operating Temperature: -40şC to 85şC
Storage Temperature: -55şC to 85şC
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical Specifications:
Dimensions: .81” high x 4.25” deep x 5.5” wide

Connectors:
(1) Duplex SC connector (monitor port)
(2) Duplex SC connectors (network ports)

Certifications:
Fully RoHS compliant

Part Numbers:
10 GigaBit Multimode Fiber Tap
TP-SR5-SCSLM
TP-SR4-SCSLM
TP-SR3-SCSLM
TP-SR2-SCSLM
TP-SR1-SCSLM
10 GigaBit Singlemode Fiber Tap
TP-LR5-SCSLM
TP-LR4-SCSLM
TP-LR3-SCSLM
TP-LR2-SCSLM
TP-LR1-SCSLM